Usinig Openmoko freerunner with XP

For using freerunner with window, it could reference this article, here
Here are my steps,

* XP access to Freerunner
1) power phone on. Don’t plug the USB cable in before the boot process is finished,
or PC would ask for the driver of boot loader.
2) plug the USB cable in when getting into the screen of window desktop
3) then install the driver for this usb network device
4) Set the address of that USB network device to 192.168.0.202
5) Logging on phone with root account by using Putty(using SSH), which password is blank.
Follow above,
* Freerunner access to internet
1) To edit the properties of ur Ethernet, check “允許其它使用者透過這個電腦的網際網路來連線”(it seems that this action sets the address of this USB network device to 192.168.0.1).
2) set the gateway to “192.168.0.1″ on phone. Also, it needs to set the DNS on phone as you used to use.
3) reboot the phone.